1 / 4
Meshtastic Solar Enclosure for the Newpowa 17V Solar Panel — image 1
1 / 4

Meshtastic Solar Enclosure for the Newpowa 17V Solar Panel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Meshtastic solar enclosure built for the Newpowa 17V NPA5S-12L panel

Rating
0 / 5
Likes
60
Downloads
137
Makes
0
Views
2,046
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

NOTE: This is an early access design (version: alpha1) that has not been fully tested.  I'm uploading this early due to interest.  YMMV.

Meshtastic Solar Enclosure for the Newpowa 17V Solar Panel (Model NPA5S-12I)

This is a modular enclosure design which mounts directly to the solar panel.  It is comprised of multiple parts, giving it a modular design which allows for the enclosure to be adapted to many situations.

The models provided allow the enclosure to be mounted to a sewer vent pipe on the roof of most homes in the USA, making this an easy to install design without the need for adding holes into a roof.

The panel is held at a steep 70 degree angle, allowing for better debris shedding.  This seems to provide more than enough power for a RAK 4631 system in longer winter days.

NOTE: The lid will recess a bit.  This is intentional, in order to allow for the addition of a yet-to-be-designed gasket.

Bill of Materials (BOM) - Possibly Incomplete!

For the main enclosure box:

  • 1x NewPowa 17v panel (model NPA5S-12I)
  • 4x machine screws (M5X12) for attaching the box to the solar panel
  • 4x screw inserts (M5X10)  for the solar panel mount screw backing blocks
  • 4x screw washers (M5) for the solar panel mount screws
  • 4x split ring washers (M5) for the solar panel mount screws
  • 8x (M4X10) for the enclosure lid
  • 8x screw inserts (M4X10) for the enclosure lid
  • 8x washers (M4) for the lid screws
  • 8x split ring washers (M4) for the lid screws

For the main box enclosure interior:

  • 12x screws/inserts (M2X4) for the enclosure “sled” posts
  • 12x machine screws (M2x6) for the enclosure “sleds”
  • 1x N-type female bulkhead adapter (2" pigtail is ideal)
  • 1x PG7 cable gland for the solar power cable

For the “sled” contents:

  • RAK Wireless 19003 + 4631 LoRa module kit, with bluetooth antenna, etc.  GPS is optional and the radio sled incorporates a mount for the antenna if desired.
  • Built for the Multi-Chemistry Solar Battery Charger and Sensing Voltage Regulator (MCSBC-SVR-v1.1). A new solar charger that offers more efficient energy harvesting and support for LTO, LFP and Li-Ion batteries. Available on Etsy here.
  • Supports 2 lithium titanate oxide (LTO) HTC2265 batteries.  Voltaic Enclosures plans to sell these as well.
  • 2x zip ties to mount the LTP batteries to the battery sled.

For the mounting bars:

  • 4x stainless steel bolts (#10-24x2-½"), or 6x if no antenna mount block will be added.
  • 2x stainless steel bolts (#10-24x3"), if an antenna mount block will be added.
  • 12x stainless steel washers (#10)
  • 6x stainless steel split-ring washers (#10)

For the sewer vent mount adapter:

  • 1x stainless steel bolt (#10-24x1”)
  • 1x stainless steel wing nut (#10-24)

 

CHANGE LOG

2025-02-19:

  • Opened up license to Public Domain
  • Added FreeCAD model file
  • Uploaded wall mounting block model file

2024-04-05:

  • Uploaded missing “Lid” model file

 

Tags