12 equal temperament fretboard construction from first principles in a Fusion 360 sketch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fret locations for guitar, bass, ukulele and so forth can be directly constructed in a CAD sketch without a calculator.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Austin Shaner has put a lot of work into a Fusion 360 file to generate fretboards.
He provides metric and imperial versions of the file here https://grabcad.com/library/parametric-fretboard-v3-1
Out of interest, I wanted to lay the frets out from first principles without pre-calculating locations as Austin did, and so built this Fusion 360 sketch and quickly built and cut an example board in the attached file.
Please link to this object page on printables to cite it when it's useful to you.
Extrude an octave's worth of fret locations
Copy to the higher octave
Scale down by half
Build the body of the neck
Split the surface with the fret extrusions to mark the locations for the fret wires
