1 / 4
Lily of the valey Maiglöckchen Flower — zdjęcie 1
1 / 4

Lily of the valey Maiglöckchen Flower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flower with crafty energy

Ocena
5 / 5
Polubienia
95
Pobrania
334
Wydruki
3
Wyświetlenia
1451
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a 3d print with a little bit of a crafty energy. To achive the natural shape of plants, whitch is not straight and more organic, I used a heatgun to bend the plant stems and the leafs. I recomend PLA for this procedure, because of it's low melting point. If you don't own a heatgun, maybe a hairdryer will suffices. Do not overheat your material, and bend the stem and leafs with your fingers. Take care not to burn your model or your hands :). After this, you can assemble the blossoms. They mostly stay in place, but to secure them I used glue. If a hole is to small for the branches, you can trim them with scissors.

 

Tagi