1 / 9
Flsun SR (Super Racer) LGX Lite extruder housing (effector cage) — zdjęcie 1
1 / 9

Flsun SR (Super Racer) LGX Lite extruder housing (effector cage)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My Flsun SR housing for Bondtech LGX Lite, Trianglelab TCHC TD6 Heatsink with TUN Pro Nozzle

Ocena
0 / 5
Polubienia
9
Pobrania
76
Wydruki
0
Wyświetlenia
803
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is housing I made for Flsun SR to mount:

  • Bondtech LGX Lite extruder
  • Trianglelab TCHC TD6 Heatsink
  • Trianglelab TUN Pro Volcano Nozzle 
  • Trianglelab CHC Pro Kit

It used stock screws and additional to M3 nuts and six M3x10 screws to mount.

It may be a little tricky to put it over Bowden tube inserted into the Heatsink, you have to slide it on.

No modifications to effector plate required, The only thing needs to be modified is the heatsink, I had to partly cut two ribs from the heatsink, and make threaded holes to mount it to the effector plate (shown at photo).

Check out my collection of Flsun SR Upgrades I made or used.

Some supports required to print it.

Tagi