1 / 1
FNATR #02 Box 6 PTFE Tube Passthrough — zdjęcie 1

FNATR #02 Box 6 PTFE Tube Passthrough

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A passthrough adapter for the FNATR #02 Box 3D printer enclosure allowing for 6 4mm OD PTFE tubes to be passed through.

Ocena
0 / 5
Polubienia
2
Pobrania
28
Wydruki
0
Wyświetlenia
250
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 6 PTFE tube passthrough for the FNATR #02 Box Enclosure in four parts. Loosely based on FNATR's original design for their filament passthrough before they revised it and began including a printed filament guide in the kit.

You will need to print the passthrough body, a ‘lock’, and two ‘keys’. Assembly is self explanatory. Should fit most 4mm OD PTFE tubes comfortably but I did run a 4mm drill through each of the holes since I printed the one I am using with speed and not accuracy. YMMV.

Tagi