1 / 1
FNATR #02 Box 6 PTFE Tube Passthrough
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A passthrough adapter for the FNATR #02 Box 3D printer enclosure allowing for 6 4mm OD PTFE tubes to be passed through.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 6 PTFE tube passthrough for the FNATR #02 Box Enclosure in four parts. Loosely based on FNATR's original design for their filament passthrough before they revised it and began including a printed filament guide in the kit.
You will need to print the passthrough body, a ‘lock’, and two ‘keys’. Assembly is self explanatory. Should fit most 4mm OD PTFE tubes comfortably but I did run a 4mm drill through each of the holes since I printed the one I am using with speed and not accuracy. YMMV.
