1 / 2
70mm Base Jaws for Vise Miniature Holder — zdjęcie 1
1 / 2

70mm Base Jaws for Vise Miniature Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of jaws to holde miniatures with 70mm base diameter.

Ocena
4,5 / 5
Polubienia
15
Pobrania
138
Wydruki
2
Wyświetlenia
540
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A set of jaws to hold miniatures with 70mm base diameter. There are two variants: one for the original chuck and the other, labeled removable, is to be used with Removable Jaws Mod.

Each jaw has a 0.2mm sacrificial layer of material in one of the grooves for printing stability. Print with that side down on the print bed.

In order to use with Removable Jaws Mod thread the jaws should be inserted in the following order 2-1-3.

The range of diameters of grippable round object  is ~68-82mm (~68-90mm with Removable Jaws Mod).

Suggested print settings:
- Layer height: 0.2mm
- Supports: Paint on a bit of support for the tip of the jaw. Organic supports work great.
- Perimeter generation: Classic (not Arachne)

Tagi