Liczymy pasujące modele…
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
This is the 170mm diameter version from my bigger filter: https://www.printables.com/model/1030245-hamburger-mattenfilter-frame-200mm-diameter The needed mat size is 50x50cm.
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
Spray can holder, i use it for WD40. Internal diameter 70mm Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30%
This bracket allows you to use an 80mm fan where you would normally use a 70mm one. My use case was to make a CPU cooler much quieter but there are plenty of other uses. You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan…
Modeled this adapter with the conspit wheels in mind The hexagon and triangle piece I reccomend manufacturing in Aluminium 6mm plate The cilinder has a diameter of 75mm, length of 28mm, the hole in middle has a diameter of 20mm, and 4…
Upgrade your XIKII INDUSTRY FF08 case with this custom-designed SSD tray replacement. Instead of the stock SSD tray.
just a small holder for 50x70 mm prototyping PCB with 2 holes for connectors on the side
I designed my own box because I could not find what I was looking for: There should be 12 columns for E12 series The drawers should be as small as possible, I don't want to take up a lot of space. The resistors should fit in full length,…
Sprüh - Dosenhalter für bis zu 70 mm Durchmesser 6 * 70mm Durchmesser + 2 * 42mm Durchmesser Flaschen
Adapter for mounting a steering wheel with a 6x70 mm bolt pattern (Sparco, Momo, etc.) to an IKEA Skandis. Use M5 insert nuts for mounting and the original steering wheel bolts.
SenseCAP Solar Node P1-Pro - Mast Holder Adapter (10-70mm) This is a custom mounting adapter designed for the SenseCAP Solar Node P1-Pro . While the original accessory included by the manufacturer is limited to masts or pipes with a…
This is a lens cap which attaches to the bayonet mount (lens hood mount) of my Nikon AF-S DX Nikkor 18-70mm lens while the Hoya 67mm Pro 1 Digital UV Filter is still attached. I believe it should also work with the following cameras (and…
Bust of a demon lord, with base, generated with Tripo3D text to model, cleaned up in meshmixer and added a base. I would not recommend scaling this down, but it can definitely scale up. Print profile includes separated base, monocolor…
Bust of a viking maiden, with base, generated with Tripo3D text to model, cleaned up in meshmixer and added a base. I would not recommend scaling this down, but it can definitely scale up. Print profile includes monocolor model, and…
Rake 70mm wide 70mm wide for raking small flower beds use PLA or PETG or whatever you want ;-) Print settings 0,2mm layer 5 walls 15% infill no supports
I have used this adapter in order to mount wheel with bolt pattern 6x74mm to Fanatec podium hub which has bolt pattern 6x70. Print settings: 4 wall 5 bottom and top layers 40% infill PLA You will also need M5 rutex inserts (Nardi to…
Gridfinity bin for YATO 100x70mm din square, probably fits other 100x70mm din squares too, step file included for modifications. Square ends up slightly below bins surface, so stacking is possible. Magnet sockets included. Printed from…
This is a 70mm shower drain cover with a knob on the top. In my Shower it fits perfectly. I used PETG-Filament because its more cemical resistance than PLA or TPU.
This is a model holder in size of 70x70x70mm. You will also need a rubber band to hold your model in place. Enjoy!
Set of gears that friction fit to the lens. Made to fit the Tokina AT-X Pro 28-70mm F2.8
I made this for something like 10 years ago and threw it up on Thingiverse and Cults3D to see if anyone could use it. For some reason it has been downloaded a total of 6000+ times. So hey, it seems popular. Created with Customizer!…
I created this adapter for kitchen exhaust/smoke extraction because I couldn't find this size anywhere, the problem being that in the kitchen I already had a rectangular hole with these measurements
Needed something that would allow me to get some space between my tripod head and a mount I am using. Using just a screw to extend it wouldn't be very stable or strong so I decided to make something that would give me height and stability…
Based on my famous ultra articulated snake, i proudly present the ultra articulated Dragon! There are four sizes of the dragon available, the huge, the big, the small one and the baby. Here you can get the BIG one. The other sizes you can…
CVD Achse 1:16 Länge 70mm / Achsabstand 65 / Ø5
Für rechteckige Sockelleisten bis 70mmx 15mm. Man kann sie individuell in kleineren Grössen zuschneiden. Diese Modele sind zum ankleben an die Leiste.
A crochet needle, modeled after a store bought one. 7cm in length. Recommend printing with high detail - like 0.1mm layer height. Tested using vapor smoothing to get a smoother edge - the standard technique did not work too well - made…
Hey Folks, I wanted to have a brakelight on my bike. I decided to choose the Supernova TL3 pro. Due to the fact that I don't wanted to make some new holes in my bike and I can't replace the previous tail light as it was mounted on the…
Fanadapter 60mm to 70mm Update v2: 30.06.26 added screw holes and step included for remixing added new adapter with 70mm fan grill
Made this for my brothers racing sim rig. He was using the Thrustmaster Sparco R383, but wanted to replace the steering wheel, but it didn't fit the hole pattern of the original controller. This adapter requires: - 6xM6 nuts to add to the…
Zylindrische Dose extra lang mit Deckel zum Schrauben. Durchmesser 70mm, Längen von 100 mm bis 350 mm. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. ................... Extra-long cylindrical container with screw-on…
Customized version of http://www.thingiverse.com/thing:1060283 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1060283 Instructions Using the following options: BORE_DIAMETER = 66.7 NUMBER_OF_TEETH = 98…
Customized version of http://www.thingiverse.com/thing:1060283 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1060283 Instructions Using the following options: BORE_DIAMETER = 66.7 NUMBER_OF_TEETH = 98…
I quickly made an emblem for my friends car. Utilized PrusaSlicer filament change and SVG import during the design phase, Outer Diameter is exactly 70mm. He was unable to find a Skoda for this exact wheel cap.
A Netpot for a 70mm hole. Small holes designed small enough, that clay pebbles stay within the netcup. Dosent require supports thanks to dome shape.
Hello! I've done this on my thrustmaster T500RS, but it should fit all the “lower cost” thrustmaster wheelbase such as T300 and others. Either minor or major disassembly is required depending on your goal. In both cases it is needed to…
Longer version of spool holder that comes with mini.
I made these just for fun to see how fast I could cool the bed off between prints. I used these on my MK4 and there is a difference between left and right, so you have to print one of each. These are the fans I used, of course they are…
Requires 2x Multiboard Connectors: https://www.printables.com/model/716558-multiconnect-generic-connector-for-your-multiboard Built in support, print upside down, remove support and use.
Simple Gridfinity Bin to store a Sony FE 2.8 24-70mm GM II camera Lens. Has a generous amount of play front to back to allow whatever Lens cap, or dust cap you might have. Either aftermarket or stock. A second variation of the files have…
Sony FE 28-70mm Gridfinity Bin 2x3 bin Plenty of space in front of the lens to store even if removed from camera with zoom fully out. As well space is made for aftermarket lens caps, if in use.
Podtacek, také známý jako tácek pod sklenici, je malý plochý předmět umístěný pod sklenicemi, hrnky nebo lahvemi. Slouží k ochraně povrchů stolů před skvrnami, kruhy od nápojů nebo teplem. Podtacky mohou být vyrobeny z různých materiálů,…
Podtacek, také známý jako tácek pod sklenici, je malý plochý předmět umístěný pod sklenicemi, hrnky nebo lahvemi. Slouží k ochraně povrchů stolů před skvrnami, kruhy od nápojů nebo teplem. Podtacky mohou být vyrobeny z různých materiálů,…
Medium spool for filament, does not require supports, consists of only two elements
Customized version of https://www.thingiverse.com/thing:1920577 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1920577 Instructions Using the following options: clamp_length = 70 clamp_height = 24…
I suggest: no supports 0.75% infill lots of perimeters. enjoy!
This replaces the stock battery tray in the Freewing F-22 70mm EDF to allow the routing of the servo wires through the sides and under the tray.
Simple adapter to fit a Nardi wheel onto a Simucube/OSW/etc standard 70mm PCD base. Requires 6xM5 heated inserts to be fitted into the Nardi (non-recessed) holes. I used these heated inserts, M5x6x7OD size, but have also included the STEP…
I ordered a couple of these Simagic QR adapters for my OSW Simucube wheel from AliExpress because they were dirt cheap in comparison to similar offerings and had good reviews online. When they arrived, I realized that the Simagic/Moza…
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
Short tamper for cup about 70mm diameter. It can conveniently stand upside down. I've added a strip of diffused surface in slicer.
Box for screws/other mat 70 mm height, over 50x50mm grid, 3x3 modules format
This minimalist decorative vase features a clean, simple design, perfect for modern or contemporary interiors. Standing 170 mm tall and 91 mm wide, it is ideal for decorating shelves, tables, or desks. No supports required , making it…
Hello, these are gridfinity boxes 4x2 with different height 60mm 70mm, 80mm I hope youll like it
Mount the Sunyima 6V7W 185x270mm solar panel to a 35mm diameter pole with this model. Available in both orientations. Panel is angled to 15° degrees. Zip-tie or hose clamp needed. Consider printing with a brim because the models are very…
My main lens' cap is always falling off in my camera bag. This over the top style cap works far better. If you can get TPU to play nice, that is going to be your best bet. It also works with PETG and PLA, but you will want to size up the…
“Professional” filament dryers are a little expensive so I found a household dryer (250W for <20 EUR) just a bit bigger (23cm) than spool and designed a spacer to accomodate std 70mm wide spool. You may print more than one and stack them…
Použití např. na domácí activity board pro vaše dítě
I got several medals for gaming, and wanted to stick them to my PC. This medal holder fits a 70mm medal. Insert 3 neodym magnets with the size of 10x2mm in the given slots, or adjust the model for a different magnet size.
Gedruckt in PETG hält ohne Probleme schon über ein Jahr.
Brakelight/Taillight bracket for the (less) cheap chinese ebike light kit with 70mm spacing . Mounting holes meant for 35mm spaced seat bolts on stealth bomber seats. Actual mounting holes are made with 5mm space in either direction for…
This ist my first try tro design a self watering pot for bonsai. I have tried to develop a bonsai pot that is as flat as possible despite the water reservoir. The water level indicator was also kept very minimalist to set the focus at the…
Originally designed to fit around 15 meters of UTP cable. Used to carry UTP in my backpack. Print in PETG for better durability if your printer is capable/tuned enough. PLA is also fine.
Printed in PLA with no issues. Fits snug in 70mm hole in my desk.
Das Material, was ich verwendet habe ist PETG. Druckeinstellungen: 0,4 mm Düse 0,16 mm Schichthöhe 20 % Füllung Druckzeit ca. 1,5h Viel Spaß beim Drucken! :)
Reworked the original tripple holder, and made it slightly bigger, to make better compatibility with wither range of cans 7 cans version will also be available Print time approx 8.25 hours, 0.25 layer height Esun ABS+
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
I created a modern tea light candle that flips over and serves as another when the other side is either stuck or dirty.
Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…
Modified the text to be embossed
Schnittlehre um Isolierungsrohre mit einem Aussendurchmesser von 70mm, die beim Heizungsbau eingesetzt werden, in 45° und 90° zuzuschneiden. Habe die Bohrung 72mm gemacht und mit einer Fase versehen damit es handlicher wird…
a protector for the 70mm Shinwa caliper (part 19892). It has a snug fit, best insertion is as following: First slot the bottom end in, then slide in the inner diameter prongs, finally push in the main prongs. printed with PETG Side note:…
Adapter für Absaugschlauch von 100mm auf 70 mm oder umgekehrt Innenmaße: 70mm/100mm Außenmaße 75mm/105 Material: PET-G (30% Infill)
Settings: Filament: PLA, PETG Layer height: 0.2mm or less Wall loops: 2 Top shell layers: 0 Bottom shell layers: optional Infill: No Support: No I printed with bottom shell layers 2 and then made a hole for garland. You can print it in…
If you want to cramp in smart switch but don't have enough space - this is solution for you!
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…
I modified this projet because I haven't found this IKEA vase. There are two files to be printed, the jar (redesigned with its ribs) and its cap. I hope to be helpful! Good job! P.S. Not finding the PGM 37DC12 / 77 engine I decided to use…
Standard Quality: 0,2mm Oben/Unten: Linie Unteres Muster für erste Schicht: Konzentrisch Füllung: 10-15% Erste Schicht Geschwindigkeit: 5mm/s Druckplattenhaftung: Skirt Stützstruktur: Aus Material: PLA
25% Gyroid, 5 walls, 8 top and bottom, Brim Print the full length cap upside down with supports. Only hardware is 4 M3 coarse thread screws and 1 drum spring per mag and a little superglue to hold it in place, built like Moose's 31k mags.…
Printed at 0.20mm layer hight with 10% infill and i was able to print it without any supports. I used PETG but other materials will probably work aswell. Printed on Creality Ender 3 V3 SE.
Remixed mount to have camera lower
Wheel mount for 70mm wheeled longboards. 0.4mm nozzle 0.2mm layer height 2 walls (yes, I know it's hard to believe) tree supports 20% infill
Here is a jig for a 70mm pipe bend. This jig is made up of two part connected with two M8 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
This is the missing lower piece to a 70m Nexus fan mod for the OG Xbox. It goes at the bottom and fills in the 2 holes, then the other mount holds the fan over it. The 70mm Nexus fan mod is here:…
For better strenght of printed part add more perimeters 1, Easy mounting on the wall 2, attachable by 2 x M4 screws with recessed heads 3, Easy to see what version do you have
Spacer with 6x70mm bolt pattern. Outer ⌀80mm Inner ⌀60mm Thickness 15mm Bolt holes ⌀5mm
A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…
quick desing nad print to instal led panel on the wall or ceiling.
This is a simple IKEA Alex spacer to elevate your desk solution to around 81cm. Printed in PETG. Tested with a 0.4mm and 0.8mm Nozzle, works fine. If you print with a 0.8mm nozzle a pair of 4 spacers will be finished in around 5.5h - with…
60mm and 70mm fan mount for Ender 3 toolbox. can use 60 or 70mm fan up to 15mm thick. Mount slot for buck converter. Aliexpress link Option fan filter Aliexpress link This design is not compatible with Ender 3 pro. Print Settings Printer:…
Handy wire spool holder with a nice cover. A must have in your electronics maker / hacking setup! The cover can be used as a stopper/brake for the spools. Holds 10 spools! Intended to be used with 70mm wire spools! You can find a bunch of…
