OG Xbox 70mm Nexus Fan mod lower plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just the missing lower cover.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is the missing lower piece to a 70m Nexus fan mod for the OG Xbox.
It goes at the bottom and fills in the 2 holes, then the other mount holds the fan over it.
The 70mm Nexus fan mod is here:
https://www.printables.com/model/79247-original-xbox-70mm-nexus-fan-adapter-and-mount
The 40 Noctua fan mount is here:
https://www.printables.com/model/79249-original-xbox-10-gpu-40mm-fan-adapter
Here are/were the fan listings at the time.
https://www.amazon.com/dp/B003PNLRLU
https://www.amazon.com/dp/B009NQLT0M
I used the screws from the 40mm fan to hold the 70mm Nexus fan in the mount and the rubber mounts to hold the 40mm in its mount.
I run a custom bios named Cerbios and I use it to set the fan speed to 40%, it keeps the OG Xbox at about the same temp as the original fan but much quieter and uses a .ini file to set the bios options (like fan speed) instead of needing to flash the bios every time I want to make a change.