OG Xbox 70mm Nexus Fan mod lower plug
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just the missing lower cover.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 59
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This is the missing lower piece to a 70m Nexus fan mod for the OG Xbox.
It goes at the bottom and fills in the 2 holes, then the other mount holds the fan over it.
The 70mm Nexus fan mod is here:
https://www.printables.com/model/79247-original-xbox-70mm-nexus-fan-adapter-and-mount
The 40 Noctua fan mount is here:
https://www.printables.com/model/79249-original-xbox-10-gpu-40mm-fan-adapter
Here are/were the fan listings at the time.
https://www.amazon.com/dp/B003PNLRLU
https://www.amazon.com/dp/B009NQLT0M
I used the screws from the 40mm fan to hold the 70mm Nexus fan in the mount and the rubber mounts to hold the 40mm in its mount.
I run a custom bios named Cerbios and I use it to set the fan speed to 40%, it keeps the OG Xbox at about the same temp as the original fan but much quieter and uses a .ini file to set the bios options (like fan speed) instead of needing to flash the bios every time I want to make a change.