1 / 3
Hot Wheels car gude for Hot Wheels 1:64 Slot Racing Cars 280cm Track Set - w/ Carry Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is the plastic guide that holds the car on the track.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 2154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Print then trim the length to suit the track, I printed in PLA and it works well. I did notice it may stick on the track, if you have this issue try trimming it slightly with a sharp knife.