1 / 2
Rapido Caravan Grip — zdjęcie 1
1 / 2

Rapido Caravan Grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handling grip for Rapido Caravanes folding caravan from '94.

Ocena
0 / 5
Polubienia
8
Pobrania
56
Wydruki
0
Wyświetlenia
307
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Let me introduce you to my first published model.

This is a grip for Rapido Caravanes folding caravans. The old ones were rotten so I recreated them and printed them new.

I printed them with 36 massive bottom layers, so the part where you screw the grip in is massive. I didn't want to risk breaking the part while screwing it in and handling the caravan on a camping site.

Infill printed at 15%, used a brim to print the part, to reduce warping. Used eSun PETG. Layer height isn't too important, so I used 0.2mm STRUCTURAL on a Prusa MK4.

I guess that same grip design might be used on other caravans from that manufacturer, too, but I'm not too sure.

Maybe someone might find it usefull. Happy printing!

Tagi