1 / 2
Rapido Caravan Grip — image 1
1 / 2

Rapido Caravan Grip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€4.23 – €5.17 net (excluding VAT)

For file: Griff_0.4n_0.2mm_PETG_MK4IS_3h19m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.70 excluding VAT (range midpoint).

Weight reported by the author
94 g
Print time reported by the author
3.31 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Handling grip for Rapido Caravanes folding caravan from '94.

Rating
0 / 5
Likes
8
Downloads
57
Makes
0
Views
311
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Let me introduce you to my first published model.

This is a grip for Rapido Caravanes folding caravans. The old ones were rotten so I recreated them and printed them new.

I printed them with 36 massive bottom layers, so the part where you screw the grip in is massive. I didn't want to risk breaking the part while screwing it in and handling the caravan on a camping site.

Infill printed at 15%, used a brim to print the part, to reduce warping. Used eSun PETG. Layer height isn't too important, so I used 0.2mm STRUCTURAL on a Prusa MK4.

I guess that same grip design might be used on other caravans from that manufacturer, too, but I'm not too sure.

Maybe someone might find it usefull. Happy printing!

Tags