Anet A6/A8 Threaded Frame Mount/Clamp, Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want better and faster printing, you need to make the Anet A6/A8 more rigid with a stiffer frame.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 707
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
If you want better and faster printing, you need to make the Anet A6/A8 more rigid with a stiffer frame.
One way of doing this, is to clamp/mount the y-carriage M8 rods to a solid base plate. The plate can be plywood or similar.
Most other solutions I found is either too big, requires dis-assembly or lacks a firm grip on the frame.
This design is a simple U shaped clamp/mount with integrated thread, keeping a firm solid grip, no sliding when printing.
Very easy to use after the printer is assembled - Place printer on base, put clamps on M8 rods, mark holes and fix printer to base with screws.
To assemble you will need:
- 4x printed base frame clamps (optional without thread).
8x Screws for mounting clamps to base plate. I have provided a version without threading if needed.
See photos for assembly. Steady printing ... :-)
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 30% infill
- 3 perimeters, 4 top and 3 bottom layers
- No support or elephant foot compensation needed