1 / 5
Anet A6/A8 Extruder Heatsink Fan Spacer/Support Upgrade — zdjęcie 1
1 / 5

Anet A6/A8 Extruder Heatsink Fan Spacer/Support Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Proper and more rigid support for Anet A6/A8 40mm cooling fan.

Ocena
5 / 5
Polubienia
19
Pobrania
149
Wydruki
4
Wyświetlenia
941
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

In the Anet A6 kit the 40mm fan is bolted against the cooling rib to keep the filament assembly drive together. This is done without no support for the fan.

I made this spacer/standoff design to give proper support for the 40mm cooling fan and make the assembly more rigid. To make assembly easier the two spacers is interconnected with a bridge with correct spacing, just insert it into the cooling rib as shown on the photos.

Shown model is printed in PETG, any non-flexible filament will work.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

  • 0.20mm layer height, 40% infill
  • 2 perimeters, 4 top and 3 bottom layers
  • No support or elephant foot compensation needed

Tagi