Radiator Pipe Collar (escutcheon ring)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor...
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 208
- Wydruki
- 2
- Wyświetlenia
- 1601
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor - the sizes available in the nearest hardware store would not fit, and I have a 3D printer, so...
There are models for 17, 27 and 34mm pipes - If you have pipes with different dimension, just scale the nearest model to fit.
As an alternative leave a comment with the size you need and I will upload a model.
To mount just open split part and put on pipe/tube.
PET will work without breaking, don't know for other materials.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 15% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support or elephant foot compensation needed