1 / 2
K40 40W Laser Lens fitting ring — zdjęcie 1
1 / 2

K40 40W Laser Lens fitting ring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The ZnSe lens had no support in my K40 CO2 laser, here is the fix.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

When I got my K40 40W Chinese laser, the ZnSe lens had no support - it was just dumped in and screwed in place.
As there was no support or protection the lens could easy get scratched, break or get out of focus.

This thing gives the missing protection and centers the standard 18/19mm lens in the holder.

>> If you like it, please leave a like, rating or a tip... :)

Print Settings

  • 0.20mm layer height, 20% infill
  • 2 perimeters, 3 top and 2 bottom layers
  • No support or elephant foot compensation needed

Tagi