Mini Bit Driver for EDC [MUST HAVE]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small bit driver that uses quick release bit holder. It can hold 3 bits in storage + 1 loaded in holder.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 988
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Hello!
I created mini bit holder that fits in my EDC pouch.
It holds 3 bits in storage and one bit in quick release bit holder.
Parts used:
- Quick change bit holder (28mm shaft length, but you can use shorter ones)
- Bits of your choice (standard 25mm long bits)
Threads are designed quite loose, so they will function even if your printer is not very precise.
Note!
Print body in standing direction (threads closer to build plate) and use big brim.
I used 5 walls for extra strength and 50% infill.
Bits are held in by friction and can be taken out easily. Quick release holder is friction fitted into the model but I recommend using some super glue so it does not fall out.