Locking foldable spool holder for Voron V0.2 (Print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print in place version of Matszwe02's foldable spool holder for the Voron 0.2
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 677
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This spool holder is extended and can lock in the folded and unfolded state just like the original by @Matszwe02. The only difference is that this version is printed in place in order to minimize part count. That means that you can use this without any additional parts compared to the official holder provided by the Voron team.
Works amazing with 85mm wide spools and is sturdy enough to take full a 1kg spool without issues.
Print in ABS or ASA and use the settings listed in the Voron 0.2 manual. I do not suggest printing it with any other settings as the overhangs may fail otherwise. The tightest tolerances are around 0.2mm which a well tuned printer should be able to print.
Huge thank you to the original creator Matszwe02 and the Voron team for the excellent designs and ideas!