Dadao Style Sword
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dadao style sword, 88cm overall length.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dadao style sword with a 60cm blade length, a 28cm hilt with ring lenght and a 88cm overall length.
FILAMENT
Print the blade parts with something stiff like PLA, PC, or any carbon fiber infused filament.
PRINT SETTINGS
Layer height: 0.2mm
Total wall width: ~2.5mm (4 perimeters with a 0.6mm nozzle)
Top and bottom shell thickness: ~1.2mm (6 layers at 0.2mm height)
Infill (general): 10% gyroid
Infill (grip parts): 50% - 90% for changing the balance point
PRINTING
Print the parts flat, as provided.
ASSEMBLY
Glue: Use a glue that can fill gaps and makes a very strong bond.
Registration pins: Use short pieces of filament as registration pins.
Step 1-4: Glue the left and right blade parts as well as the left and right ring parts together.
Step 5: Glue the completed ring into the corresponding groove in "grip ri.stl".
Step 6: Glue the left and right grip parts together.
Step 7-9: Glue the blade sections a, b and c together and then insert and glue the completed blade into the grip. Use generous amounts of glue to overcome gaps and make a very strong bond.
Step 10: Glue the left and right guard pieces onto the blade and grip in such a way, that they cover the intersection.