1 / 8
LED Light Bar for Ender 3 V3 KE with PTFE Tube Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Light Bar for Ender 3 V3 KE with PTFE tube holder guide on the right bar arm.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 1595
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (50)Powiązane
I make this remix because my spool is run from dryer box and it need a guide for PTFE tube and to add the LED Light Bar, both need to screw at the same position, then I have to mix it together.
The right arm is mix with PTFE holder. (2 versions hole add socket)
Left arm 7mm & 8mm switch hole
center bar is just rotated to be ready for print.
Print parameters: Recommend 3-4 Wall loop with 15-25% infill
Additional parts:
- 24V COB LED strip 1m. (use 45cm)
- 8x8mm self lock on/off switch
- 2P Connectors & wires
