Raspberry Pi Screen Sun Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic sun shade for the Raspberry Pi 7" Screen
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Print standing up with the magnet side down.
Requires 10x5x3 magnets. There are likely way more magnet slots than need to be filled. Minimally I'd recommend 3 on the top and 1-2 on each side. Magnets should press fit but a drop of super glue certainly wouldn't hurt.
Optionally you can place some thin backing material on the back to keep the magnets from contacting the screen. I used some 8x1mm weatherstripping material that I had on had that worked perfectly, but no idea where it came from.
I originally made this for my sBitx v3 but that just uses a normal Raspberry Pi 7" screen.