1 / 2

CLOWN FACEMASK

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

● This STL file is recommended for FDM Printers!

● 3D Printing Time Based on Ender 3: 1 Day 13 Hours 55 Minutes (will vary accord to you printer model)

● Approximately Heigth: 23 cm 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

● Line Width/ Nozzle: 0.4 mm

● First Layer Line Width: 0.48 mm / 120%

● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)

● Recommended Initial Layer Height: 0.16 mm

● Recommended Layer Height: 0.16 mm

● Recommended Perimeters/ Walls: 3.

● Recommended Infill (%): 10% (Gyroid)

● Needs Support: No.

● Build Plate Adhesion: Skirt.