1 / 13
K8200/3Drag GT2 X Belt Mount with easy Tension - Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple construction are for upgrading your K8200/3Drag to GT2 belt on X axis.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
This simple construction are for upgrading your K8200/3Drag to GT2 belt on X axis.
It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension.
For complete upgrade of X axis to GT2, you need:
- GT2 6mm belt (mine is from eBay)
- GT2 pulley for motor (20 teeth and 5mm motor hole)
- The printed parts (2x wedge + mount left + mount right + clamp)
- Two M3x30mm screws
Two M3 nuts Assembly as shown on pictures.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.20mm layer height, 15% infill
- 2 perimeters, 3 top and 2 bottom layers
- No support needed