Adapter for 120mm fan to 4 inch duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D design for a 120mm computer fan to a standard 4-inch duct to extract the gasses from a 3D printing enclosure.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 476
- Wydruki
- 1
- Wyświetlenia
- 2040
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This 3D design offers a solution to connect a 120mm fan to a resin 3D printer enclosure, facilitating the extraction of off-gasses from UV resin printing. Designed for a 120mm fan to fit a standard 4-inch duct (Dryer Duct), ensuring airflow. Its construction ensures no support needed and easy printing. It can be placed in the middle of the duct or inside the enclosure. I added 4 holes to add zip ties or bolts to hold the assembly.
By directing harmful emissions to a vent in the wall, this adapter contributes to a safer and healthier workspace, mitigating the risk of exposure to harmful fumes.
I used a High static pressure fan like the one in the picture.
I used PLA+ and no supports with a 0.2mm layer height.
UPDATE: I initially described this model as created for a 140mm fan size, however it is for 120mm fans. Thx to @AustinBland_2036568 for the comment and make :)
UPDATE 2: if you scale this model to 116.67% you can fit a 140mm fan.
