Crutch Side Attachment(s)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to be a system where you can snap on and off attachments to the side of the crutches.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 449
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recent events had me on crutches - this is meant to be a system you can snap on and off attachments to the side of the crutches.
The “crutchHolderBase” attaches to the side of the crutch using a #8 bolt, a washer, and a nut.
The “accessories” slide onto the base with a catch at the bottom.
Currently there are two accessories:
- crutchSidePlateHook → small hook accessory
- crutchSidePlateHookL → larger hook accessory
Recommend to print the base with 3 or 4 perimeters.
Recommend to print the Hook(s) with 3 or 4 perimeters and higher density infill (25-50).
Printed in PLA but PETG would probably work best.
EDIT: added STEP files to make updates/customization easier