Crutch Side Attachment(s)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is meant to be a system where you can snap on and off attachments to the side of the crutches.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 1
- Views
- 449
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recent events had me on crutches - this is meant to be a system you can snap on and off attachments to the side of the crutches.
The “crutchHolderBase” attaches to the side of the crutch using a #8 bolt, a washer, and a nut.
The “accessories” slide onto the base with a catch at the bottom.
Currently there are two accessories:
- crutchSidePlateHook → small hook accessory
- crutchSidePlateHookL → larger hook accessory
Recommend to print the base with 3 or 4 perimeters.
Recommend to print the Hook(s) with 3 or 4 perimeters and higher density infill (25-50).
Printed in PLA but PETG would probably work best.
EDIT: added STEP files to make updates/customization easier