Haunted Sewer Book Nook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pre-oriented, supportless, print in place. Just download, slice, and go! Model is of course inspired by Pennywise.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 346
- Wydruki
- 2
- Wyświetlenia
- 3273
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Haunted Sewer Book Nook
Suggestions for successful prints:
This print can run all at once with no supports whatsoever when sliced with the back wall flat on the build plate. Model is pre-oriented for this purpose. :)
The model has a slight chamfer along the back/bottom side as you print it. This makes it slightly less likely to warp, and makes removing the print from your bed a touch easier.
~350g of filament at 10% infill, and dimensions of roughly 150x150x80.
Post Processing and Setting the Scene
Model is highly customizable with hobby shop components and paint to add moss, fake water, and even a single red balloon. :) I also have a red balloon model elsewhere on my profile to accompany this design.
I placed an LED candle behind for a flickering effect behind the eyes. :)
Enjoy!