Syringe (Halloween Prop)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mr. Jack O. Lantern is expecting to come in to contact with many young unvaccinated children this Halloween, so to…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 666
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mr. Jack O. Lantern is expecting to come in to contact with many young unvaccinated
children this Halloween, so to protect him and his family I have supplied him with a mask
and a vaccine. I may have been a bit too late though. He has ended up with many green
warts. It seems he's already come down with something.
This syringe is a non-functional halloween prop. It has no moving parts. The plunger
piece prints separately from the rest of it. In my case it just snapped in nicely to the top,
but this will vary depending on your printer calibration. If it is too loose, a bit of krazy glue
or two part epoxy should do the trick. If it's too tight, you might need to do a bit of sanding.
For the "needle" at the end I held a finishing nail with a pair of pliers, heated up the end of
it with a lighter, and pushed it in to place.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20% hexagonal
Filament:
filaments.ca Econofil PLA White
If you liked this design, please post a make!