1 / 3
Prusa Mk3+ X motor wire guard (Updated 2021/10/30)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The X axis motor cable on Prusa is often bent when lowered. This guard prevents that from happening
- Ocena
- 4,882 / 5
- Polubienia
- 68
- Pobrania
- 249
- Wydruki
- 11
- Wyświetlenia
- 1576
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 11) (Komentarze: 22)Remiksy (0)Kolekcje (151)Powiązane
Update:
Slight change in dimension and design.
-------------------------------------------
The X axis motor cable on Prusa is often bent when lowered. The ziptie we are instructed to use doesn't help with the situation. This guard prevents bend cable from happening.
Instruction:
- Print the two parts
- Put the circular part on the wire
- Put the long part on the motor
- Push the circular part into the long part, the nylon sleeves should be trapped between the two parts
- When done properly the two parts should be very secure, without any use of screw or adhesive.

Print setting:
Doesn't matter. I use 0.3 layer height personally