1 / 3
Prusa Mk3+ X motor wire guard (Updated 2021/10/30) — image 1
1 / 3

Prusa Mk3+ X motor wire guard (Updated 2021/10/30)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The X axis motor cable on Prusa is often bent when lowered. This guard prevents that from happening

Rating
4.882 / 5
Likes
68
Downloads
249
Makes
11
Views
1,576
Reviews
17

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Update:

Slight change in dimension and design. 

-------------------------------------------

The X axis motor cable on Prusa is often bent when lowered. The ziptie we are instructed to use doesn't help with the situation. This guard prevents bend cable from happening.

Instruction:

  1. Print the two parts
  2. Put the circular part on the wire
  3. Put the long part on the motor
  4. Push the circular part into the long part, the nylon sleeves should be trapped between the two parts
  5. When done properly the two parts should be very secure, without any use of screw or adhesive.

Print setting:

Doesn't matter. I use 0.3 layer height personally

Tags