1 / 1
Shock absorber spacers for Tamiya Neo Fighter dt-03 chassis.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed some shock absorber spacers for tamiya dt-03 chassis.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter
They are used to use the maximum spring compression with the original shock absorbers.
I noticed that the springs had little compression even with the stock spacers.
I also added the fake separate tank to the drawing.
They are very precise to ensure that the reservoir does not rotate around the shock absorber.
To facilitate insertion, turn them on themselves as if you were tightening a screw and push towards the shock absorber cap.