1 / 2
PiCubed - a raspberry pi case design
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun take on a raspberry pi case.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a challenge for my first ever cad design project, so I decided to design around a Raspberry pi 5 with the active cooler. I learned a lot during this process, and had a lot of fun too.
Outside of the filament, you will need:
- 6 self tapping M2.5x6mm screws
- 2 - to secure the power button and bracket to the linear slide
- 4 - to secure the rbpi to the case
- 6 neodymium magnets - 2mm thick, by 5mm diameter
- glue one into each of the pockets
- glue one into each of the pockets
I hope you like it. Of course, as it is my first big design project, any feedback would be quite helpful.