Double Pole Magnet Insert Helper Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double Pole Magnet Insert Helper Tool
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 242
- Wydruki
- 2
- Wyświetlenia
- 1015
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Double Poles Magnet Insert Helper Tools
This tool helps you to consistently grab magnets in a desired orientation to insert in printed parts.
Add a magnet with opposing orientation in both ends (Marked N and S). Tiny bit of glue might be needed to fix the magnet into the cavity.
Now use one side to grab and insert magnets in “Part A” of your models, then use the other side of the tool to grab and insert a magnet to “Part B” of the model, so now Part A and Part B should attract each other.
Requires magnets with the following sizes depending on which file you are printing:
| File Name | Magnet Size |
| Double Poles Magnet Insert Helper Tool - 3x2 | 3x2 mm (3x1.75 mm Actual size) |
| Double Poles Magnet Insert Helper Tool - 6x2 | 6x2 mm |
PETG is recommended for strong adhesion during printing. It printed fine without brim.
Hope you find it helpful.
Happy Printing =)