1 / 1
Adventurer 5m (AD5M) anti-backlash spacers (TPU only!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to limit play in the X-axis and Y-axis
- Ocena
- 0 / 5
- Polubienia
- 100
- Pobrania
- 650
- Wydruki
- 0
- Wyświetlenia
- 5000
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (118)Powiązane
UPD 13.05.24: Models of X-spacers have been corrected, Y-spacers have been added.
Spacers in the X and Y axis are installed between the pressure plates and bushings, in case you want to get rid of the play that is felt if you shake the printer's head while holding the nozzle.
Attention! It is necessary to print spacers from soft materials such as TPU. Spacers made of hard plastic can lead to poor results!