cherry mx compatible keycaps flat top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cherry MX compatible keycaps modified to allow for screw-heads.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I have printed an enclosure for a modified corne split keyboard and some screw-heads protrude above the surface of the keyboard that would interfere with standard keycaps full travel. I use OpenSCAD to modify keycap models that might work with my keyboard. These ones are the most compatable ones I have found to date.
The scad file I created is included and can be modified. It requires the original STL in the same folder. I have also included an STL of my version of the modified keycaps.
I printed using PLA.
0.2 layer height
Caps top down. I used a brim and filed of the extra material.
These made a very tight fit on the switch stems so I also lightly filed the stem holder part of the keycap to the degree possible.
The keyboard project can be seen here: