1 / 1
cherry mx compatible keycaps flat top — image 1

cherry mx compatible keycaps flat top

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cherry MX compatible keycaps modified to allow for screw-heads.

Rating
0 / 5
Likes
8
Downloads
83
Makes
0
Views
475
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I have printed an enclosure for a modified corne split keyboard and some screw-heads protrude above the surface of the keyboard that would interfere with standard keycaps full travel. I use OpenSCAD to modify keycap models that might work with my keyboard. These ones are the most compatable ones I have found to date.

The scad file I created is included and can be modified. It requires the original STL in the same folder. I have also included an STL of my version of the modified keycaps.

I printed using PLA.

0.2 layer height

Caps top down. I used a brim and filed of the extra material.

These made a very tight fit on the switch stems so I also lightly filed the stem holder part of the keycap to the degree possible.

The keyboard project can be seen here:

Tags