Qidi X-Smart 3 simple door wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple door wedge to prop the front door of the X-Smart3 slightly open when needed
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An extremely simple door wedge that fits perfectly in the groove on the bottom of the front opening on the Qidi X-Smart 3. I wanted something that allows to hold the front door open slightly ajar and since the printer rocks quite a bit, it's impossible to keep it only slightly open; either is fully open or fully closed.
The model sits perfectly in the groove, as shown in the pictures, allowing it to be secured in place without the need of screws or glues or tapes. The side facing the door is slightly angled to allow it to be aligned exactly with the angle of the open door when placed somewhere in the middle. You can also adjust how wide the opening of your door is by sliding the wedge closer or further away from the hinge, but of course, the angle on the wedge won't match the door anywhere.