Power strip holder for Anker 511 Travel Power Strip and Supedesk Monitor Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power strip holder for Anker 511 Travel Power Strip and Supedesk Dual Monitor Stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Attachment designed to hold an Anker 511 Travel Power Strip to a Supedesk Dual Monitor Stand.
Allows for adjustment in height of the holder and placement between monitor arms. Intent is to manage all power cables to the devices on a small sit stand desk so that only one cable extends from it and make vertical movement and relocation of the desk easy.
The holder uses a printed track nut to secure to the track of the monitor stand. Uses 20mm M3 hex machine screws and M3 nuts to secure parts. An M3 nut is press fit into the printed track nut to allow for tightening of the holder against the track. Bolts will need to be tightened a lot to keep the power strip in place.
Printed in Tough PLA with 3 perimeter layers and 15% infill for flexibility and strength. Prints with no supports.