1 / 6
ESP WROOM 32 Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press fit case for a esp wroom 32 devkit. Modeled for when the pins are soldered upwards, with extruded buttons for…
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 429
- Wydruki
- 0
- Wyświetlenia
- 2772
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (61)Powiązane
Press fit case for a esp wroom 32 devkit.
Modeled for when the pins are soldered upwards, with extruded buttons for the buttons on the board.
See image for board type
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2/0.12
Infill:
30% Gyroid
Filament:
3DJake eco PLA PLA
Notes:
Supports: Touching buildplate, only on "Case"
Buildplate adhesion: SkirtLid is designed to be printed with the top facing down, making the buttons print against the buildplate
Category: Electronics