Royal Palace Gate - Fes, Morocco
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇲🇦 MMU-ready miniature of a lavish entrance to a Moroccan royal palace.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇲🇦 مرحبا بك في المغرب
Welcome to Morocco! Bienvenue a Maroc!
This model was created by Dany Sánchez.
The New Entrance to the Royal Palace in the city of Fès, in northern Morocco, is a jewel of Moroccan craftsmanship. Built in 1969-1971 by order of King Hassan II, who reoriented the entrance of the palace complex from the Old Mechouar in the north to a new southern approach facing the modern Ville Nouvelle of Fes. The gates are lavishly decorated with elaborate zellij mosaic tile work, carved cedar wood, and doors of gilded bronze covered in geometric patterns (from Wikipedia).
MiniWorld3D is happy to bring this historical model to life as a homage to the people of Morocco. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks. Please give credit, it's all about spreading culture!
Consider joining our Printables.com Members Club or Patreon!
printables.com/@MiniWorld3D
patreon.com/MiniWorld3D
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG,
MiniWorld 3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!
Photo credits: Thanks to Mosaic Manufacturing for the stunning print you see in the photos, made with Pallete 2S,
-----------
Printing Tips
Provided in 2 versions:
- Regular, with all parts fused as one, single body for single color.
- MMU, split to be printed in colors at once using an external device.
Folders included are labeled accordingly.
Suggested parameters:
For better details, print slow, such as 15 or 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%
Some recommendations:
- You may have to scale it up, 150 or 200%
- It can be printed normal, from the ground up; or laying flat on its back.
- No supports are needed (there are some overhangs but it is worse to use supports)
- There's a photo attached so you can choose matching colors.