Adjustable Circuit Board Holder Span
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom spans for a generic "Adjustable PCB Printed Circuit Board Soldering and Assembly Holder Frame"
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I purchased a PCB holder and it had a max width of 9". That was too short for a project I'm working on, so I made this modular span replacement.
The pieces are 30mm x 15mm x 120mm with an additional 10mm for the plug ends. There is only mechanical friction holding them together, so I would suggest cyanoacrylate glue or epoxy once you have the length you need.
The board I have is about 11", so I printed one male end cap, one female end cap and two spans.
Holder like this: https://www.amazon.com/DEVMO-Adjustable-Soldering-Assembly-Rotation/dp/B08FR12PWX