Gridfinity Spanner Wrench Tray (metric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10x4x6 Gridfinity Tray to hold spanners from 22mm down to 5.5mm in 1mm increments (except the 5.5mm)
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 545
- Wydruki
- 2
- Wyświetlenia
- 4505
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A 10x4x6 Gridfinity Tray to hold spanners from 22mm down to 5.5mm in 1mm increments (except the 5.5mm) It Fits my Bacho spanners nicely but doesn't fit my RS pro spanners (they are too long). Its not quite stackable The 22mm spanner is too chunky. I have split the design up in to 3 pieces for easier printing on standard size printers Two pieces have tabs to help them glue together and the other two pieces have a much bigger surface area due to the split point so no need for tabs. I've also included two versions. one with fairly even spacing and one with a lot of space at the back to suit a drawer that is a 10x4 grid and doesn't quite open all the way so on the original I couldn't pull out the back spanners.