Car headrest dog guard adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Car headrest dog guard replacement adapter clamps.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The hooks and attachments that came with the headrest dog guard for my car were very cheap, fragile, and bulky. I could not use the trunk cover anymore since it was so bulky, and the hooks were almost breaking and you could not tighten it good. So I designed this quickly and used it and it's perfect.
The M-nut size is for M6 (nut: width: 6mm max) and the holes are also for M6. You can use whatever length M6 screw. I used 30mm x M6.
Hole for headrest metal diameter is 15mm.
The part that holds the guard in place is outer: 60x60mm, and the inner part 48x48mm.
Printed 50% infill, no support needed. Just turn the 60mm side down for printing.