Car headrest dog guard adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Car headrest dog guard replacement adapter clamps.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The hooks and attachments that came with the headrest dog guard for my car were very cheap, fragile, and bulky. I could not use the trunk cover anymore since it was so bulky, and the hooks were almost breaking and you could not tighten it good. So I designed this quickly and used it and it's perfect.
The M-nut size is for M6 (nut: width: 6mm max) and the holes are also for M6. You can use whatever length M6 screw. I used 30mm x M6.
Hole for headrest metal diameter is 15mm.
The part that holds the guard in place is outer: 60x60mm, and the inner part 48x48mm.
Printed 50% infill, no support needed. Just turn the 60mm side down for printing.