The Sniffles Catcher: Tasteful Generic Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large vase-mode print I designed as a tissues bin, but works great for any generic organizing purpose.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple straightforward vase-mode print that yields a large bin that can be used for any lightweight needs. I made this specifically to catch tissues for my wife's often-sniffly nose for her bedside table. It fits perfectly on a 256x256 size bed (I printed on my Bambu X1C).
I recommend printing with (for 0.4 nozzle):
0.2 mm layer height, 0.7 outer wall width, 3 bottom layers, spiral vase mode. I used a brim because of the huge flat size to make sure it didn't peel, but it would likely work fine without it.
Should work great with PLA/PETG.
Shown in Prusament Galaxy Silver and Prusament Mystic Brown filaments in slightly different scaled sizes. The included 3MF is for the larger silver size, but can be scaled down.
Also included: an OrcaSlicer file for silver print with the settings I used, if you wish to use it.. but it is tuned for my filament/printer.