Double Expo Dry Erase Marker Holder With Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A no-frills marker caddy that uses 5x2mm magnets.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a magnetic caddy made to fit two chisel-tip Expo makers. It's perfect for metal whiteboards or refrigerators! The openings will fit markers a little larger than the original Expos, so they should be compatible with other brands as well.
You can print this model flat on its front (without supports) or standing up vertically. Printing vertically may turn the magnet holes into slight ovals. Printing horizontally will create a small bridge inside the slots, but the magnet holes should be more circular/accurate.
The magnets have a .2mm tolerance. Size the model up by 1-2% if .2mm tolerance isn't quite enough for your printer.
Assembly:
Place a 5x2mm magnet in each of the holes and press them in with your thumb (or against a hard surface). This may require a bit of force. If your magnets are loose, a drop of superglue should do the trick.
Enjoy!