1 / 3
Makita 5007MG Circular Saw Dust Port Vacuum Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lets you connect a Ridgid wet/dry vacuum to the dust port on a Makita 5007MG circular saw.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (18)Powiązane
Requires an M5 x 2 cm bolt to attach it to the saw.
I printed in PLA with a 0.4 mm nozzle and 0.2 mm layer height, with the adapter on its back. I found this orientation to minimize supports and keep the layer lines oriented in a reasonably strong way.