1 / 2
BMW F-series (F32) Wireless Phone charger stand for the cup holder — zdjęcie 1
1 / 2

BMW F-series (F32) Wireless Phone charger stand for the cup holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wireless charger phone stand

Ocena
0 / 5
Polubienia
8
Pobrania
76
Wydruki
0
Wyświetlenia
2035
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Wireless charger for BMW F-series (at least F32, not verified with other models), detachable.

Uses a wireless silicon plate from AliExpress (search for: wireless QI charger plate). The silicon wireless plate is cut shorter from the top using a razor blade. This is necessary due to the cameras sticking out of the phone (in the pictures: Nothing One cellphone). Otherwise, the phone's camera outlets would create a gap between the charger plate and the phone.

Consists of 3 parts:

  1. Cup section: Provides a snug fit. The USB wire goes inside the cup and comes out on the side.
  2. Support arm: Attaches to the cup using 2xM4 bolts.
  3. Stand/Phone holder: Requires gluing. You may want to offset it slightly to the right, depending on your preference and desired angle rotation for the driver's seat.

The current dimensions for the phone (stand) are 75.6mm wide and approximately 8.6 to 9mm thick (free space after wireless silicon pad).

Tagi