Ace of Spades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Token playing card, the Ace of Spades.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is my design for a token playing card, the Ace of Spades. The card dimensions are about 78 x 51mm and 2mm thick.
If the card is not to your preferred dimensions, consider scaling the print file in your slicer software.
My print is made in 1.75mm eSUN PLA+ White and Black filaments, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer. An AMS unit is used to interleave the filament colours. Print supports are not required.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For more of my models, see my main uploads site at MakerWorld as “Wiseone”.